Sonos offers the best wireless smart audio soundbars that are the perfect addition to your smart home.
But, like other products, they can also act up or stop working the way they should. Or, if you plan to sell it, you’d also want to reset it before handing it over to another person.
When that happens, you don’t have to ditch the unit. Instead, you can fix it with troubleshooting tips.
So if you’ve got a Sonos Arc that is acting up, I’d suggest resetting it.
Now, if you don’t know how to reset Sonos Arc, fret not!
In this post, I’ll guide you on how to reset your Sonos Arc with step-by-step post. Trust me, it will take a few minutes and you’ll be done resetting your Sonos Arc. So you can stream your favorite audio seamlessly without any problems!
Should you reset your Sonos Arc?
Now before you try to reset your Sonos Arc soundbar, you should figure out the core issues.
For example, if your Wi-Fi isn’t connecting, there could be a problem with your network or a router.
So first, try to restart or reboot your router and see if that solves the connectivity issue.
However, if it doesn’t resolve the problem, you should reset your Sonos Arc by following the steps.
Step 1: Unplug it
First things first, you’ll need to power off the Sonos Arc.
And the best way to do that is to unplug the cord either from its back side or from the wall socket.
In short, you just have to take out the power cable attached to it.
Step 2: Press the Infinity Button on Sonos Arc
On the center of the device, you’ll find a button with an infinity icon.
You just have to press and hold it down while you plug the power cord back in its place.
While holding down the button, you should notice the LED flashing white. It’s indicating that your Sonos Arc is in the process of resetting.
Step 3: Wait for the orange blinking light
Don’t release the button until the device starts to blink orange.
In the first few seconds, while you’re holding down the button, the light would flash white before flashing orange.
When it finally starts flashing orange and white light, you can release the button.
Step 4: Wait until the orange and white light turns to green
After you’ve released the button, you’ll have to wait for the green signal.
In other words, your Sonos Arc will flash orange and white before flashing green.
Once it starts to flash green light, it means that your device is reset successfully!
Now you can set up and connect it properly to use it for yourself. Or, you can also gift or sell it to a potential buyer!
Things to keep in mind when you reset the Sonos Arc soundbar
A fresh setup of your Sonos Arc requires you to factory reset it.
However, it erases almost every setting that you’ve made over time.
That said, it’s important to keep certain things in mind if you’re thinking about resetting your Sonos Arc.
Your personalized settings – You may or may not know this, but resetting your Sonos Arc will erase all personalized settings you’ve made. It can include your Wi-Fi network, room grouping, EQ settings, and any other customized settings. So before you reset your Sonos Arc, make sure you’ve got a record of these settings if you wish to restore them later.
Your Music streaming accounts —Another setting to keep in mind when resetting your device is your music streaming accounts. So if you’ve set up your music services on your Sonos Arc, they’ll be removed. In short, all your connected accounts of streaming services like Spotify, Apple Music, or Pandora will be deleted. I recommend keeping your login credentials handy to easily log back into services after you reset your Sonos Arc.
Sonos app – You’ll also need to set up the Sonos Arc again using the Sonos app. Just make sure that you’ve got the app installed on your mobile device or computer.
Wi-Fi network – Wi-Fi network that’s connected to your Sonos Arc device will be also disconnected after the reset procedure. But the good thing about resetting your Sonos Arc is that it can fix the connectivity issues of your Sonos Arc.
Surround sound setup – If you have the Sonos Arc integrated into a surround sound setup with other Sonos speakers, you may need to reconfigure the surround sound settings and ensure all speakers are properly connected.
Is Sonos Arc reset not working? Try these tips
Tried resetting your Sonos Arc, but it’s not working. I’d recommend you try these tips.
- Reset button – Sometimes, you don’t know but you forget to press the right button. So it’s important to make sure that you’re pressing the reset button correctly. The reset button is a small indentation located on the back of the Sonos Arc, near the power cable connection. Use a paperclip or a similar tool to press and hold the button for about 5 seconds until the LED light starts flashing white and orange.
- Power supply – Make sure the Sonos Arc is connected to a power source and turned on before attempting to reset it. Without power, the reset process may not work. For example, you’ll need to plug back the power cable during the reset procedure.
- LED indicators – Pay attention to the LED light on the Sonos Arc. During the reset process, the LED light should flash white and orange to indicate that the reset is in progress. If you don’t see any LED activity, it’s possible that the reset button is not being pressed correctly. Or worse yet, there could be an issue with the unit itself.
- Firmware issues – If your Sonos Arc isn’t responding to the reset procedure, it’s worth considering whether there may be firmware or software issues. Check if there are any available firmware updates for the Sonos Arc and ensure that your Sonos app is updated. Updating the firmware and app may resolve any potential issues.
- Lastly, contact Sonos Support – If you’ve followed the proper reset procedure, but can’t seem to reset the unit. I recommend you get in touch with Sonos Support. They can provide further assistance and troubleshoot the issue to help you resolve it.