Genie Aladdin Connect lets you control your garage door with your smartphone. And that’s what I like about it, a garage door that’s fully automated!
After all, it’s a useful and great smart choice for garage doors!
Sometimes, though, it can run into problems.
And when that happens, you have no choice, but to reset it.
Though a little complicated procedure, resetting your Aladdin connect is a way to go!
Read on if you’re wondering, “How do I reset my Aladdin connect?”
Before you reset the Aladdin connect…
As a smart garage door owner, you should always take some precautions. It is because safety is important. That said, here are some precautions to keep in mind before you reset the garage door opener.
- Make sure that the garage door is closed before resetting the Aladdin Connect garage door opener.
- Also, make sure that no person or object is in the path of the garage door.
- Use caution when handling the Aladdin Connect device and the garage door opener.
- Make sure to reprogram the Aladdin Connect device after resetting it, so it can work with the garage door opener and the Genie Aladdin app.
- Turn off the power to the garage door opener by unplugging it or turning off the circuit breaker that controls the opener.
- And always follow the instructions manual for safety precautions properly.
That said, follow the steps below for “How do I reset my Aladdin connect?”
Step 1: Find the “learn” button
Some garage door models have the “Learn” button while others have the “Home” button. Depending on the model, you can use either of these to perform the reset procedure.
You can find this button on the back or side of the motor unit or opener panel.
Once you’ve found this button, you can move to the next step.
If you can’t seem to find it, you should read the user manual.
Step 2: Hold down the “learn” button
Before you hold down the “learn” button, try to press it one time. Sometimes, this is enough to reset the device. Check to see if the door opens through the Aladdin Connect. If it does, you should now hold this button down for several seconds.
This procedure will clear the stored data. So you can set up the device again!
Step 3: Wait until the indicator light blinks
Within 30 seconds of pressing the “learn” button, press and hold the button on the Aladdin Connect device that you want to program. Hold the button until the motor unit’s indicator light flashes.
Now, keep it pressed until you see the indicator light flashing. Or hold it down until the LED light stops flashing or the unit turns off.
Step 4: Test the connection
Finally, you should now check the device to see if it has been reset. For example, launch the Aladdin Connect app to check if the garage door is reset. If needed, you can also delete the device from app and set it up again.
Another Method to reset Aladdin Connect
The Genie Aladdin Connect has a Wi-Fi button on its side. By pressing and holding down this button, you can reset the device.
So press this button for several seconds. And you’d see the green light flashing.
Keep it pressed until you hear the beep sound and the light would change to yellow.
Now, set up the device again using your Wi-Fi and app.
Contact the Aladdin Connect
If you aren’t able to factory reset Aladdin connect garage door, it’s time to contact the company. Usually, they’ll assist you or reset your Aladdin connect. So you can easily set it up again by connecting it to your WIFI.
All in all, resetting your Aladdin Connect garage door opener doesn’t have to be a total nightmare. With a little bit of patience, some elbow grease, and the right steps, you’ll be back to opening and closing your garage door like a boss. So, there you have it!