Any smart homeowner can agree that Braava Jet M6 is an amazing robotic vac out there!
After all, it offers amazing features like long battery life and noiseless cleaning, to name a few!
And that’s what makes it a popular choice of the smart robotic vacuum!
Though it works well, this white square robot vacuum can still run into problems.
The one common problem you’ll encounter is Braava Jet M6 white light flashing.
It’s when your iRobot Braava jet M6 is stuck on white light that’s swirling around the ring.
Luckily, I’ve found a couple of simple solutions to help fix this issue!
So you can get your Braava Jet M6 up and running – to keep your floors clean!
Solution 1: Reboot the Braava Jet M6
It’s possible that you might already be familiar with this old troubleshooting trick. Most of the time, this trick resolves the issues in almost every smart device.
So try rebooting the Braava Jet M6 if the white light doesn’t go away.
If you don’t know how to reboot the Braava Jet M6, fret not. It’s simple – just press and hold down the “Clean” button for several seconds!
And you’re done restarting your M6 Vacuum!
If the vacuum is still stuck on swirling white light, try other solutions in the post!
Solution 2: Hard reset or Factory reset the Braava Jet M6
Factory resetting your Braava M6 is another solution that should resolve the white light swirl problem.
Before considering the reset procedure, you should know it’ll erase the settings. And you might need to set up the device all over again!
That said, here’s how to reset your Braava Jet M6.
On your Irobot Braava, find the three buttons next to each other – Home, Clean, and Target!
Press and hold down these three buttons for several seconds. Release them after 20 seconds.
The white ring light should disappear since the unit returns to its default settings!
Solution 3: Remove it from the charging dock
If it’s charging while flashing white ring light, it could be the charging problem.
So the first thing you should do is to turn it off and on. In short, restart it while it’s on the charging base.
If it doesn’t resolve the issue and the white light still circles around the ring, try another method of restarting. For example, remove it from its charging dock and turn it off. Keep it switched off for several seconds before turning it back on!
It should resolve the issue of white light in your iRobot Braava Jet M9!
Solution 4: Update the firmware
Like other devices, iRobot releases new versions of firmware that ensure better performance of your robot vacuum. Plus, it fixes the bugs and glitches causing the issues in your Braava M6!
So update the firmware to resolve this white ring issue along with other issues in your Vacuum!
Here’s how to update the firmware of your Braava Jet M6.
Step 1: Turn on the Bluetooth on your smartphone
Step 2: Press the “Clean” button on your vacuum
Step 3: Launch the app on your smartphone and the app will check for the latest firmware updates
Step 4: Confirm to update the firmware if there’s the latest one available
And you’ll be able to update the firmware successfully!
Solution 5: Replace the battery
If the white light circles around the ring, it’s likely a battery issue!
Chances are that the battery of M6 is dead and needs a replacement – especially, if it’s been a while!
So, your best bet is to swap out that dead battery with a fresh one.
Once you do that, the white ring light should go away. So you won’t have to deal with this issue anymore!
After all, a new battery will give your vacuum the juice it needs to work like a charm. And helps fix the constant white light flashing and other charging issues!
That said, I recommend you get that dead battery replaced!
Contact iRobot Support
If the white light flashing doesn’t stop after trying the solutions, it’s time to contact iRobot Support.
Your Braava Jet M6 may be bricked or faulty.
But there’s nothing to worry about because iRobot might send you a replacement!
Wrapping Up
Being a robotic vacuum obsessed, I find Braava Jet M6 as one of the amazing smart vacuums. It keeps the floors clean without needing anyone’s help. But like any other smart device out there, it can sometimes hit a few bumps in the road. So whether your Braava Jet M6 has a white light flashing problem or docking issues, there’s nothing to worry about! With a few handy troubleshooting tips or solutions, you can easily fix these pesky problems that cause your vacuum to behave strangely!